The aircraft manufacturer had provided a different recommended procedure involving the separate removal of the engine and pylon components.
Instead, the maintenance operation involved handling the engine and pylon together.
During the process, the assembly could become improperly supported or misaligned, placing excessive stress on the attachment structure.
Investigators later identified damage to the pylon attachment components that had occurred during the maintenance operation.
The damage was not immediately obvious to maintenance personnel.
The aircraft returned to service.
It continued flying.
Passengers boarded it.
Pilots operated it.
And each subsequent flight brought the aircraft closer to the moment when the damaged structure would finally fail.
This was one of the most important findings of the entire investigation.
The disaster was not caused by an explosion, a bird strike, or an unexpected weather event.
It was the result of a mechanical failure connected to maintenance practices that had introduced hidden structural damage.
May 25, 1979: The Final Takeoff
On that Friday afternoon, Flight 191 was preparing to depart Chicago.
The weather was suitable for flight operations, and the airport was functioning normally.
The aircraft taxied toward Runway 32R.
Inside the cabin, passengers settled into their seats. Flight attendants prepared for departure, and the pilots completed their final checks.
The flight crew consisted of experienced aviation professionals.
Captain Walter Lux and First Officer James Dillard were in the cockpit, along with Flight Engineer Alfred Udovich.
Their responsibility was to operate the aircraft safely and complete the scheduled journey to Los Angeles.
Nothing about the departure suggested that the airplane was approaching a catastrophic structural failure.
At approximately 3:02 p.m., the aircraft began accelerating down the runway.
The engines produced the thrust necessary to bring the heavy DC-10 to takeoff speed.
The airplane moved faster.
The runway markings passed beneath it.
The pilots monitored their instruments and followed the normal takeoff procedures.
Then, as the aircraft lifted from the runway, the left engine and pylon assembly separated.
The engine did not simply become detached and fall harmlessly away.
Its separation caused serious damage to the surrounding wing structure and disrupted important aerodynamic systems.
The engine assembly fell behind and to the left of the aircraft.
At the same time, hydraulic lines and electrical connections were affected.
The pilots were suddenly operating an aircraft whose physical condition had changed dramatically during the most demanding phase of flight.
They had almost no time to understand what had happened.
The Moment the Aircraft Began to Lose Control
One of the most important aspects of the Flight 191 disaster was the effect that the engine separation had on the aircraft's leading-edge slats.
These devices are installed along the forward edge of an aircraft's wings.
During takeoff and landing, they help generate the additional lift needed at relatively low speeds.
They are particularly important during takeoff because the aircraft is operating close to the lower end of its safe flight-speed range.
The left engine separation damaged the systems associated with the left wing's leading-edge slats.
The slats on the left wing retracted, while those on the right wing remained extended.
This created an asymmetrical aerodynamic condition.
In simple terms, the two wings were no longer generating the same amount of lift.
The right wing produced more lift than the left wing, causing the aircraft to roll sharply to the left.
The DC-10 was still relatively low above the ground.
At that altitude, the pilots had almost no time or space to recover from such a dramatic loss of control.
The situation was made even more difficult by the aircraft's warning systems.
The cockpit warning system did not provide the pilots with a clear indication that the left wing's leading-edge slats had retracted.
As a result, the flight crew did not receive the information they needed to understand the precise nature of the aerodynamic emergency.
The aircraft continued to climb briefly, but its left wing dropped.
The pilots attempted to maintain control.
Witnesses outside the airport watched as the airplane banked sharply.
For people on the ground, the sight was terrifying.
A large commercial jet was suddenly flying in a way that appeared completely abnormal.
Some witnesses initially thought the aircraft was making a steep turn.
Others realized that something was seriously wrong.
Within seconds, the DC-10 descended toward the ground.
The Crash That Shook Chicago
Flight 191 crashed into an open field near the airport, close to the intersection of Touhy Avenue and Mount Prospect Road in Des Plaines, Illinois.
The impact was devastating.
The aircraft struck the ground at high speed, breaking apart and producing a massive explosion.
A fireball erupted from the wreckage.
Thick black smoke rose into the sky, becoming visible from surrounding roads and neighborhoods.
People nearby heard the explosion and immediately understood that something extraordinary had happened.
Some rushed toward the area.
Others called emergency services.
Airport personnel began responding, while firefighters and police officers moved toward the crash site.
But the scene was almost impossible to comprehend.
The aircraft had been destroyed.
Debris was scattered across the surrounding area.
The intense fire made access difficult, and the scale of the destruction left little hope of finding survivors.
All 271 people aboard Flight 191 died.
Two people on the ground were also killed.
The victims included passengers and crew members who had expected to arrive in Los Angeles later that afternoon.
Their families were left waiting for information that would change their lives forever.