Tile grooves accumulate dirt: 5 easy cleaning methods. Scrub gently and it will be white and clean like new.
Tile grooves are a common area where various types of dirt, such as limestone, soap scum, and dust, are likely to accumulate. When left for a long time, the tile grooves, which were once clean and white, will turn yellow or black, making them look dirty and a place for mold and bacteria to accumulate, which can be harmful to health.
To remove stubborn stains in tile grooves, you can use the following natural methods:
1. Clean the tile grooves with vinegar and salt.
Use only vinegar
- Pour vinegar into a spray bottle without diluting it.
- Spray vinegar onto the tile grooves that you want to clean.
- Leave it for about 2-3 hours.
- Use a brush to scrub gently and rinse with clean water.
Note: Vinegar should not be mixed with other cleaning agents as a dangerous chemical reaction may occur.
Use salt mixed with vinegar.
- After spraying vinegar into the tile grooves
- Sprinkle salt on the area.
- Use a brush to gently scrub the stains to help loosen them.
- Rinse with clean water.
2. Use ammonia to help remove stubborn stains.
Ammonia has the ability to remove stains and mold well.
method:
- Mix 1/4 cup ammonia with 1 cup clean water.
- Pour the mixture into a spray bottle and spray it onto the tile grooves.
- Use a brush to scrub gently and rinse with clean water.
3. Use baking soda to remove black stains.
Baking soda is a natural cleaning agent that effectively removes stains.
Use baking soda and water.
- Mix baking soda with water in a ratio of 1:1.
- Apply the mixture onto the tile grooves.
- Leave it for about 5-10 minutes.
- Use a brush to scrub and rinse with clean water.
Use baking soda mixed with vinegar or lemon juice.
- Mix 1/2 cup baking soda with 1/2 cup vinegar or lemon juice.
- Apply the mixture onto the tile grooves.
- Leave it for 5 minutes and then use a brush to scrub.
- Rinse with clean water.
4. Use borax (powder or water) and hydrogen peroxide.
Borax and hydrogen peroxide are great at removing stubborn stains from tile grooves.
method:
- Sprinkle borax into the tile grooves.
- Leave it for about 5 hours.
- Pour hydrogen peroxide into the tile groove with borax.
- Leave it for another 2 hours.
- Use a brush to scrub and rinse with clean water.
5. Use a specialized tile cleaner.
If the tile grooves have stubborn stains that cannot be scrubbed off naturally, you can choose to use commercial tile cleaners such as VG-205, Dyma Scale, etc.
Caution:
- Some tile cleaners are highly corrosive and may cause the tile to fade faster.
- Gloves and a mask should be worn to protect against chemical fumes.
- Read the directions on the label before use and test on a small area first.
summarize
- Vinegar and salt : Helps remove stubborn stains and mold.
- Ammonia : Suitable for tile grooves with stubborn dirt.
- Baking soda : Use with vinegar or lemon juice to help remove yellow stains.
- Borax + Hydrogen Peroxide : Effectively removes stubborn stains and mold.
- Specialized cleaner : Use in cases where stains are very stubborn.